Product Safety & Installation Guide

Product Safety Disclaimer

 

Important Notice – Please Read Carefully

  1. Third-Party Accessory

    • This product is a third-party accessory and is not affiliated with or approved by Gozney.
    • Installing this shield constitutes a modification of your oven. Use of this product may void the oven manufacturer’s warranty.

  2. Assumption of Risk

    • By using this product, you accept full responsibility for any risks, including but not limited to:
      • Personal injury (burns, cuts, etc.).
      • Property damage (oven malfunction, fire, or explosion).
      • Serious harm, including fire-related accidents or gas leaks.
    • FlameCraft assumes no liability for any injuries, damages, or malfunctions resulting from the use, installation, or improper handling of this product.

  3. Proper Use and Handling

    • Do not modify, bend, or reshape the shield. The shield is designed for an OEM fit and must be installed as intended.
    • Always follow the provided installation instructions to ensure safe and proper use.

  4. User Responsibility

    • Understand that you are introducing your hand into an oven. Take all necessary precautions to prevent burns or injuries.
    • Ensure there are no gas leaks or open flames during installation.

Installation Instructions

Before You Begin:

  • Ensure the oven is completely turned off and cooled.
  • Verify that the oven temperature is below 45°C (113°F) using a laser thermometer or other reliable tool.
  • Close the propane fuel knob and confirm there are no gas leaks.

Step-by-Step Installation:

  1. Remove the Original Shield:

    • Carefully remove the existing shield from your oven.
    • Never stack the FlameCraft shield on top of the original shield.

  2. Install the FlameCraft Shield:

    • Place the FlameCraft shield in the same position as the original shield.
    • Ensure it fits securely into place.

  3. Verify Safety:

    • Double-check that the shield is properly seated.
    • Confirm the propane knob is securely closed and that there are no gas odors or leaks before turning the oven on.

  4. Operate Safely:

    • Turn on the oven only once all safety checks are complete.
    • Always monitor the oven during operation.

Safety Reminders

  • Never attempt to change the shield while the oven is on or hot.
  • Allow the oven to cool for a minimum of 12 hours before attempting to remove or replace the shield.
  • Use heat-resistant gloves and tools for added protection.
  • Do not modify or force the shield into a position that doesn’t align with its intended fit.

By installing and using this product, you acknowledge that you are modifying your oven at your own risk. FlameCraft assumes no responsibility for improper use or failure to follow these instructions.

For questions or additional guidance, contact our team at:

flamecrastflorida@gmail.com